XGT-5000 Features: Simple Easy Operation

Location: Products >> X-Ray Fluorescence >> Micro-XRF Analyzer >> Features

Simple, Easy Operations

One of the major advantages of the XGT is that it provides superb, seamless operation, from optical image observation to elemental analysis. In just three easy clicks, you go from a view of the entire sample to specifying the 10 µm point to be measured. All operations, from sample loading to the creation of the final analysis report, are natural and intuitive, ensuring easily handling for the user.

Step 1: Easy Sample Loading

The sample is loaded into the XGT at normal atmospheric pressure. No pre-treatment is needed, so analysis can be started quickly.
There is no need to make a vacuum in the sample chamber.
A series of multiple samples can also be easily analyzed.

Place the sample in the sample holder.

There is no need for sample pre-treatment, such as conductivity processing or drying.

Load the sample holder into the XGT.

With the sample loaded, there is still no need for pre-treatment of the sample such as vacuum drawing, so after the sample holder is loaded, you can proceed immediately to specifying the analysis position.

The sample is analyzed at normal atmospheric pressure.

The sample chamber is maintained at normal atmospheric pressure, so even samples that would be damaged by a vacuum (samples containing water, living tissues, fine powders, etc.) can be analyzed with no pre-treatment.

Step 2: Quick Positioning Using Magnified Images

Just 3 clicks from a view of the entire sample to the start of the analysis of a 10 µm area.
The CCD image and X-ray beam share the same axis, so measurement positioning is easy and highly accurate.
The displayed sample image corresponds exactly to the analysis point, providing greatly enhanced operation efficiency.

Quickly proceed from a view of the entire sample to the selection of the target point.

Just three clicks from a view of the entire sample to the selection of the point to be measured.

After the image of the entire sample is displayed on the monitor, you can select the exact point for high-precision 10 µm analysis in just 3 mouse clicks.

Move the sample stage by clicking the optical image.

When you need to make minor compensations to the measurement position, simply click the displayed optical image to move the specimen stage. There is absolutely no need for complex device operations.

Before Moving Stage

After Moving Stage

Step 3: Diverse Range of Analytical Methods

A diverse range of analysis modes are available for use, ensuring the widest flexibility with the XGT.

Single Point
Obtain fast spectrum of elemental composition

Multi-Point Analysis
By selecting analysis points at multiple locations, a range of positions can be automatically analyzed.

XY Mapped Imaging
Analyze a sample for its elemental distribution over areas up to 10cm x 10cm

Step 4: Easy to Understand Results

A wide range of output options is available, including optical image, mapping image, and spectrum.
Report generation allows spectra and images to be quickly drawn together and saved as one file.
The output layout of the acquired data can be freely arranged.
Layout formats can be saved and edited.

Brochure

Features

XGT Technology