Location: Products >> Gratings, OEM & VUV
>> Vacuum UV >>
Gratings >> Aberration
Corrected Toroidal Grating
Aberration Corrected Toroidal Holographic
Grating
Specifications
and Control
| Ultimate Specification |
Standard Specification |
Control |
|
| Dimension | Up
to 300 mm length |
||
Radius
of Curvature |
Down
to 0.01% |
0.5% |
Calibrated Samples |
| Slope Error | Down
to 0.5 arcsec rms longitudinal 1 arcsec rms transverse |
1
arcsec rms longitudinal 5 arcsec rms transverse |
Visual
interferometric comparison to calibrated sample |
| Microroughness | Down
to 2 Å rms |
5 Å rms |
Micromap measurements |
| Substrate | Silicon Fused Silica SiC CVD |
||
| Coating | Au Pt AlMgF Ni |
Cr
binding layer |
Quartz
monitoring |
| Groove Density | Optimised
using JY proprietry software |
Moiré Fringes
(JY Patent) Optical control using recording layout (JY Patent) |
|
| Efficiency | Groove
depth and duty cycle ratio optimised by JY proprietary
software according to required optical layout |
||
| Groove Depth | +/-
5% |
+/-
10 |
AFM
measurements |
| c/d Ratio | +/-
5% |
+/-
10 |
AFM
measurements |
Examples of Toroidal Aberration Corrected Holographic Gratings
| Size mm |
Optical Surface mm |
Slope Error arcsec rms |
Microroughness Å rms |
Coating |
Substrate |
300x50x40 |
290x40 |
1
arcsec rms longitudinal 5 arcsec rms transverse |
Less
than 5 |
Au
or Pt |
Silicon Fused Silica |
150x30x30 |
140x20 |
1
arcsec rms longitudinal 1 arcsec rms transverse |
Less
than 5 |
Au
or Pt |
Silicon Fused Silica |
75x15x150 |
70x10 |
1
arcsec rms longitudinal 1 arcsec rms transverse |
Less
than 5 |
Au
or Pt |
Silicon Fused Silica |
Note: Groove density is obtained by interference of two spherical wavefronts.
