HORIBA Worldwide

  • Home
  • Company Profile
  • Employment
  • Investors
  • Contact Us
  • Request Info
  • Products
  • Markets & Industries
  • News & Events
  • Scientific References
  • HORIBA Scientific Segment
  • International
    Links
Applications
Measurement Types
Product List
Location: Products >> Emission >> Application Notes
Emission Application Notes
HORIBA Jobin Yvon offers a variety of Application Notes for ICP-OES, Glow Discharge OES, and C/S, O/N & H Analyzer products.  Please select the application notes you would like and click the title to view the PDF file.

Bookmark this page.
New application notes are posted regularly.

GD OES Application Notes

  • Quick Identification of a Defect
  • Thermal Treatment on Steel
  • Carburizing
  • Bulk Analysis - Cast Iron
  • Hard Coatings
  • Diffusion Studies
  • Zinc Coatings
  • Thick Anodic Aluminum
  • Automotive Applications
  • Analysis of Car Bodies
  • Analysis of Cataphoresis
  • Speciation of Chromium with Glow Discharge
  • Diamond Like Carbon (DLC) Analysis
  • Enamel on Ceramics
  • Characterization of Glass Surfaces and Coatings on Glasses
  • Depth Profile of a Pre-Painted Steel Sheet
  • Thin Alumina Films
  • Rubber Layer on Stainless Steel using Pulse RF
  • Electrical Coatings
  • Quantitative Analysis of BPSG on Silicon
  • Analysis of Multilayer Structures on Silicon
  • Analysis of a Hard Disk
  • Analysis of Hydrogen
  • Analysis of Powders
  • Analysis of Small Samples
  • JY IMAGE - Use in Glow Discharge
  • 23. Practical comparisons between Glow Discharge and SIMS
  • 25. Practical comparisons between Glow Discharge-OES and Glow Discharge-MS
  • 26. Surface and Thin Film Analysis Methods

ICP OES Application Notes

  • 00. List of Available Application Notes
  • 01. Analysis of 10% NaOH and 10% NaCl
  • 02. ICP Figures of Merit
  • 03. Evaluation, Control, and Diagnosis of ICP through Simple Experiments
  • 04. Analysis of 95% Methanol
  • 05. The Determination of Pt for Cancer Studies
  • 06. Quantitative Analysis of Soil Extracts with ICP-OES
  • 07. Analysis of Naptha
  • 08. Fast Elemental Determination of Environmental Samples with ICP-OES
  • 09. Analysis of Several Elements in a Copper Matrix
  • 10. Analysis of Chlorine, Bromine and Iodine in water using ICP-OES
  • 11. Long Term Stability Test for 19 Elemental Wavelengths
  • 12. Analysis in Geology - 1% HF and 4 g/L Boric Acid, 10g/L Lithium Metaborate and 10g/L Lithium Tetraborate
  • 13. Comparison of the Hydride Generator to the Concomitant Metals Analyzer (CMA)
  • 14. Analysis of a Vitamin Mineral
  • 15. Determination of Boron in Steel by On-Line Matrix Simplification
  • 16. Analysis of Metals in 100 g/L Copper Acetate
  • 17. Analysis of Metals in 30 g/L Barium Nitrate
  • 18. Analysis of Metals in 200 g/L Strontium Nitrate
  • 19. Analysis of Metals in 200 g/L Strontium Hydroxide
  • 20. Analysis of Glass Samples
  • 21. Analysis of 10 g/L Lead
  • 22. Determination of Ni and V in Bitumen by Simple Sample Preparation by Emulsion
  • 23. Analysis of Dialysis
  • 24. Analysis of Dust Samples
  • 25. Very Rapid Analysis of Supply Water, Sludge From Purification Station and Animal Food
  • 26. Determination of 14 Trace Elements in Stainless Steel
  • 27. Stability Test on Calcium in Cement
  • 28. Analysis of Quartz Filters
  • 29. Analysis of Lubricating Oils
  • 30. Major Elements in Cement Analysis by ICP
  • 31. Limits of Detection Obtained by ICP-OES in 10 g/L Rhodium
  • 32. Analysis of Beer
  • 33. Determination of Elements in Glycerin and Gamma-Butyrolacetone
  • 34. Analysis of Silver Dopants and Impurities
  • 35. Waste Water and Soil Analysis
  • 36. ILM05 CLP Analysis using a Fast Sequential (ULTIMA 2) and High-Throughput Combination Simultaneous/Sequential (ULTIMA 2CE) ICP-OES
  • 37. Repeatability of Traces and Major Elements in Water
  • 38. Application of ICP to the Analysis of Food and Agriculture
  • 39. Analysis of Samples Related to Nuclear Submarine Operation
  • 40. Detection Limits in Water using Assorted Sample Introduction Systems
  • 41. Interest of a Semi-Quantitative Method for Geological Samples
  • 42. Analysis of Major Elements in Glass Samples with a Sequential ICP-OES
  • 43. Analysis of Incineration Solvents
  • 44. Analysis of Nickel Base Samples

C/S, O/N & H Analyzers

  • 17. Measurement of Carbon and Sulfur in Copper
  • 18. Measurement of Carbon in Ferrosilicon
  • 19. Measurement of Carbon and Sulfur in Titanium Oxide
  • 20. Measurement of Sulfur in Rubber
  • 23. Carbon Analysis: Organic and Inorganic Carbon in Soils
  • 24. Measurement of Carbon and Sulfur in Cement
  • 25. Hydrogen Analysis in Steel and Metals: Solid Extraction or Fusion
  • 26. Modular Automation for C/S, O/N and H
  • 27. Hydrogen Analysis of Solid Samples
  • 28. Quality Assurance for the Analysis of Steel by Gas Component Analysis
  • 29. Sample Preparation and Sampling Methods for the Gas Analysis of Steel
 








  • Privacy Policy
Copyright © HORIBA Jobin Yvon. All rights reserved.